|
![]() |
![]() |
![]() |
![]() |
![]() |
||
|---|---|---|---|---|---|
| FAN7382 | 350 | 8 SOIC | a monolithic half-bridge gate driver IC for driving MOSFETs and IGBTs; Floating Cannel Designed For Bootstrap Operation to +600V; Output In-phase With Input. Be suited for PDP Scan Driver, Fluorescent Lamp Ballast | ||
| FAN7842 | 350 | 8SOP | A monolithic half-bridge gate driver IC for MOSFETs and IGBTs. Floating Channel Designed For Bootstrapping Operation to +200V; Output In-Phase With Input | ||
| FAN7380 | 90 | 8 SOIC | A monolithic half-bridge gate driver IC for MOSFETs and IGBTs. Floating Channel Designed For Bootstrapping Operation to +600V; Output In-Phase With Input | ||
| FAN7361 | 250 | 8 SOIC | Floating Cannel Designed For Bootstrap Operation To +600V; Output In-phase With Input; Typical Applications: Fluorescent Lamp Ballast; PDP Scan Driver; Motor Control | ||
| IR2103S | 210 | 8 SOIC | high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels. Gate drive supply range from 10 to 20V; Under voltage lockout; Cross-conduction prevention logic; Matched propagation delay for both channels; Internal set dead time; High side output in phase with HIN input; Low side output out of phase with LIN input | ||
| IR2103 | 210 | 8 PDIP | |||
| IR2110 | 2000 | 14 PDIP | high voltage, high speed power MOSFET and IGBT drivers; Floating channel designed for bootstrap operation Fully operational to +500V or +600V Tolerant to negative transient voltage dV/dt immune; Gate drive supply range from 10 to 20V; Undervoltage lockout for both channels; Separate logic supply range from 5 to 20V; Cycle by cycle edge-triggered shutdown logic; Matched propagation delay for both channels; Outputs in phase with inputs | ||
| IR2110S | 2000 | 16SOIC | |||
| EXB851 | 1500 | 15-pin single in-line | High speed IGBT gate driver IC, EXB840 frequency 40kHz ; EXB850 frequency 10kHz;Be suited for Servo systems, UPS, welding power supplies. EXB841 can driver 400A/600Vor 300A/1200VIGBTmodule;EXB840 can driver 150A/600Vor 75A/1200VIGBTmodule | ||
| EXB841 | 4000 | 15-pin single in-line | |||
| M57959L | 2000 | 14-pin single in-line | Recommended Driver capability: VCES = 600V Series(up to 200A Class); VCES = 1200V Series (up to 100A Class);VCES = 1400V Series (up to 100A Class) | ||
| M579562L | 5000 | 14-pin single in-line | To drive IGBT modules for inverter, AC Servo systems, UPS, CVCF inverter, and welding applications. | ||
![]() |
|||||